Panel Types


Snap-Loc Standing Seam

Panel-Snap-Loc-Standing-Seam_1Panel-Snap-Loc-Standing-Seam_2

Snap-Loc Standing Seam is a durable concealed fastener roof system with easy snap together installation. This architectural panel system uses minimally visible fasteners, giving your building a clean, attractive finish. The panel’s easy snap-on ribs attach rapidly with no hand seaming, making installation less expensive than traditional standing seam.

– Finishes: AkzoNobel’s CERAM-A-STAR® 1050 and Acrylic Coated Galvalume®
– Gauges: 29ga and 26ga standard
– 16″ panel coverage, 1″ rib height
– Applies over solid substrate with 30# felt underlayment
– Minimum roof slope: 3:12

 

 5V-Crimp

Panel-5V_1Panel-5V_2

– Finishes: AkzoNobel’s CERAM-A-STAR® 1050 and Acrylic Coated Galvalume®
– Gauges: 29ga and 26ga standard
– 24″ panel coverage, 1/2″ rib height
– Applies over solid substrate with 30# felt underlayment
– Exposed direct-fastened roof panel, traditional ”V” rib
– Minimum roof slope: 3:12

 

Supreme Rib

Panel-R_1Panel_Supreme_Rib_2

 

– Finishes: AkzoNobel’s CERAM-A-STAR® 1050 and Acrylic Coated Galvalume®
– Gauges: 29ga and 26ga standard
– 36″ panel coverage, 3/4″ rib height
– Applies over solid substrate with 30# felt underlayment
– Exposed direct-fastened roof panel, traditional ”V” rib
– Minimum roof slope: 3:12